At Banggood, we uses cookies and other similar technologies to provide you with essential functionalities and for aggregated statistics.
We also use optional cookies for a better experience with:
You can choose not to allow some types of cookies via"Cookie Settings".If you want to learn more about it, you can swipe to the bottom of the page to see the Privacy Policy
When you visit any website, it may store or retrieve information on your browser, mostly in the form of cookies. This information might be about you, your preferences or your device and is mostly used to make the site work as you expect it to. The information does not usually directly identify you, but it can give you a more personalized web experience.
Because we respect your right to privacy, you can choose not to allow some types of cookies. However, blocking some types of cookies may impact your experience of the site and the services we are able to offer.
{{$productInfo.reviewAmount.average}} out of 5
Introduction:
Introduce the Bassline , inspired from Our team pilot Nathan Loopz . This idea was originally born in 2019, and today make it into a BNF.
Even though we have many excellent Micro Freestyle drones now days, but the Bassline's performance is still the craziest.
Manual:
ELRS Version ; Frsky Version ; PNP Version
Features:
X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and OPENVTX
VTX Power up to 400mw
Support ELRS V3.0 (Need to upgrade firmware)
Powerful EX1103 KV11000 motors
CaddxFPV Ant FPV camera
Recommend battery (Not include):
Battery tray size: Maximum support for batteries with a width of approximately 17mm and a height of approximately 13mm
Specifications:
Brand Name: Happymodel
Item Name: Bassline 2S 2inch Micro FPV toothpick drone Wheelbase: 90mm Size: 115mm*115mm*40mm
Analog version Weight: 40gram
Optional Receiver version:
2.4G ELRS SPI / SPI Frsky D8/D16 / SPI Flysky / PNP (without onboard receiver)
Spare parts specifications:
Motor |
Mode: EX1103 KV11000 |
Propellers |
Weight:0.88g Material: PC Pitch:2.3inch Props Dia:52.17mm Center Thickness:5mm Center Hole Dia:1.5mm |
Flight controller |
X12 ELRS V2.1 flight
controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280 X12 Frsky V2.1 flight
controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR X12 Flysky V1.0 flight
controller built-in SPI Flysky 2.4G receiver Target: CRAZYBEEF4FS X12 PNP V1.1 flight controller
without onboard receiver Target:
CRAZYBEEF4DX MCU:STM32F411CEU6 (100MHZ,
512K FLASH) Built-in Betaflight OSD(SPI
Control) Built-in current sensor |
Onboard 4in1 ESC |
Power supply: 1-2S LiPo/LiPo
HV Current: 12A continuous peak 15A
(3 seconds) Support Bluejay firmware |
Onboard SPI ExpressLRS 2.4GHz
Receiver |
Packet Rate option:
50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V2.0 Antenna : SMD antenna Receiver protocol: SPI ExpressLRS Compatible with ExpressLRS V2.0 TX
Module Couldn’t flash separately
ExpressLRS firmware Could flash FC firmware to support ExpressLRS v3.0 TX
module |
Onboard SPI Frsky
D8/D16 receiver Version |
SPI BUS receiver Frsky D8/D16 compatible Compatible Non EU transmitter D8/D16 model Channels: 8ch/16ch No ground interference ( Transmitter and receiver 1 m from the ground): 200meter Failsafe support |
Onboard SPI Flysky
receiver Version |
SPI BUS receiver Protocol: AFHDS-2A Channels: 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 200meter Failsafe support |
PNP Version (without onboard
receiver) |
Full UART1 for external Receiver Support CRSF/GHOST/SBUS/IBUS/DSMX protocol IR1 pad(invert RX1) used for SBUS input |
Onboard 5.8g OPENVTX |
Firmware version: OPENVTX Smartaudio v2.1 PIT Mode support RCE Mode support Channels:48ch Transmitting Power: 0/RCE/25mw/100mw/400mw Power supply: DC 5V Current (5v): <650ma (400mw) |
Caddx ANT 1200tvl
camera |
Image Sensor: 1/3" CMOS Sensor Horizontal Resolution: 1200 TVL TV System: NTSC or PAL IMAGE: 16:9 or 4:3 Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: 0.001Lux@F1.2 Auto Gain Control: YES WDR: Global WDR DNR: 3D DNR Dimensions: 14*14mm(with bracket to 19*19mm) Wide Power Input: DC 3.7-18V Weight: 2g (N.W.) |
Package Included:
Item Name |
Qty |
Bassline 2inch frame and
canopy |
1 |
Option1: X12 ELRS V2.1 flight controller built-in SPI ELRS
2.4G receiver |
1 |
Option2: X12 Frsky V2.1 flight controller built-in SPI Frsky
2.4G receiver |
|
Option3: X12 Flysky V1.0 flight controller built-in SPI Flysky
2.4G receiver |
|
Option4: X12 PNP V1.1 flight controller without onboard
receiver |
|
EX1103 KV11000 brushless motor |
4 |
Gemfan toothpick 2023 tri-blade
propellers(4cw+4ccw) |
1 |
Caddx ANT 1200TVL Camera |
1 |
Onboard 5.8G Openvtx 0mw~400mw
VTX |
1 |
Canopy for 14mmx14mm camera |
1 |
Shipping method(s) | Shipping time | Tracking information |
---|