Very good motor glider from volantex. It came undamaged even if it was just in original box, not in double box. If you use original motor, than use 2S battery. If you want to use 3S battery than replace the motor with 2830, 2836, 3536, 4023 or similar.

Very good motor glider from volantex. It came undamaged even if it was just in original box, not in double box. If you use original motor, than use 2S battery. If you want to use 3S battery than replace the motor with 2830, 2836, 3536, 4023 or similar.

Very good motor glider from volantex. It came undamaged even if it was just in original box, not in double box. If you use original motor, than use 2S battery. If you want to use 3S battery than replace the motor with 2830, 2836, 3536, 4023 or similar.

Good product and quality according to the expected price. The product purchased was PNP with all electronics assembled, except hardware and control rods, and glue group. Pay attention to how difficult it can be to screw the horizontal stabilizer. In the pictures you can see that you need a long screwdriver to be able to screw the screws properly. It is also somewhat complicated (at least in my model) in the assembly of the wings. The anchoring system is by means of a kind of teton that is anchored between the wing and the fuselage; and it is somewhat fair, requiring too much force to insert the wings. You also have to pay attention to the required battery voltage, for the PNP configuration it brings. You need a 2S battery (7.4 volts) and not a 3S battery (11.1v) as most of us are used to.

Buen producto, y calidad acorde a lo esperado en relación al precio. El producto adquirido fue PNP con toda la electrónica montada, salvo los herrajes y varillas de mando, y grupo de cola. Hay que prestar atención a lo complicado que puede resultar atornillar el estabilizador horizontal. En las fotos se puede ver que se necesita de un atornillador bastante largo para poder atornillar de forma adecuada los tornillos. También resulta un tanto complicado (al menos en mi modelo) en ensamblaje de las alas. El sistema de anclaje es mediante una especie de tetón que se ancla entre el ala y el fuselaje; y resulta un tanto justo, necesitándose demasiada fuerza para insertar las alas. También hay que prestar atención al voltaje de la batería necesaria, para la configuración PNP que trae. Se necesita una batería 2S (7.4 voltios) y no una 3S (11.1v) como estamos acostumbrados la mayoría.

Good product and quality according to the expected price. The product purchased was PNP with all electronics assembled, except hardware and control rods, and glue group. Pay attention to how difficult it can be to screw the horizontal stabilizer. In the pictures you can see that you need a long screwdriver to be able to screw the screws properly. It is also somewhat complicated (at least in my model) in the assembly of the wings. The anchoring system is by means of a kind of teton that is anchored between the wing and the fuselage; and it is somewhat fair, requiring too much force to insert the wings. You also have to pay attention to the required battery voltage, for the PNP configuration it brings. You need a 2S battery (7.4 volts) and not a 3S battery (11.1v) as most of us are used to.