12V Blue Violet Laser Engraving Head Set With Wood Plates For CR-10 CR-10S 3D Printer
A part of the review has been auto-translated.
Very good set can be used with Printers supplyed with 12 and 24 VDC. More info and installation video guide under: https://youtu.be/K7X78C0qoxc
I ordered this pack to me. It is arrived, but the pack is not include the power black box. I can not plug into the power connector and I can not use the Blue Laser. Please, send me this box so I can use the laser.
as described.. I recommend
This product is very easy to install. Just remove the screws that hold the bottom plate of the case of the Creality CR10, remove the screws that hold the power supply to access the motherboard, and plug the supplied cable into the second FAN socket provided on the board. Then you have to use software that will generate the gcode from a JPG image and send it to the printer via a USB link or using the micro SD card reader. The product comes with wooden plates. to avoid consuming them during adjustments, sheets of paper can be used. This makes it possible to make a "preview" before printing on wood, leather or any other usable material. The power of this laser is not enough to burn metal, if you want to try to do this, you will need a laser of at least 5500 mW or more likely a 10w or 15w. The connection to the motherboard will then have to be adapted, as the control of the more powerful lasers is mostly in 5V TTL, while the motherboard provides 12V PWM. The glasses attached to the product are a minimum to avoid damaging the eyes. You will have to invest in a more serious model if you make many engravings, or if you plan to use more powerful lasers.
Full Review, installation and configuration manual. Remember to activate EN CC. https://youtu.be/K7X78C0qoxc
very good but there is no connector like this picture
Thanks brother, product usefully
good laser
I have already started recording little things, the focus is adjustable. excellent product quality. I'm happy about the purchase, but it only serves to record... To cut i'll buy another one of higher power.
compliant product and works very well