the finishing wasn’t so good and I see some shears on the side for the gps connection entry.

the finishing wasn’t so good and I see some shears on the side for the gps connection entry.

the finishing wasn’t so good and I see some shears on the side for the gps connection entry.

not install yet. but hope properly work well.

not install yet. but hope properly work well.

not install yet. but hope properly work well.

As described, hard plastic, normal quality! The GPS is in place. Nickel and received super fast in 13 days! Thank you Bangood

Conforme à la description, plastique dur, qualité normale ! Le GPS est bien en place dedans. Nickel et reçu super vite en 13 jours ! Merci Bangood

As described, hard plastic, normal quality! The GPS is in place. Nickel and received super fast in 13 days! Thank you Bangood

Perfect as described

Perfetto come da descrizione

Perfect as described

It does not close well, you have to stick it, for longe range is a bit large, better a thermoretractile

no cierra bien, hay que pegarlo, para longe range es un poco grande, mejor un termoretractil

It does not close well, you have to stick it, for longe range is a bit large, better a thermoretractile

We have something.

ได้เรื่องอยุ่

We have something.

Good quality, well packed. Recommend the seller

Good quality, well packed. Recommend the seller

Good quality, well packed. Recommend the seller

Very good preformance on my Diatone Taycan, I recommend!

Very good preformance on my Diatone Taycan, I recommend!

Very good preformance on my Diatone Taycan, I recommend!

It's very sturdy, made in PLA. It fits very well the GPS only for BN880 which in itself is quite big although one of the best there is. So that both caps fit and it doesn't open in mid-flight, or you put a huge thermoretractile tube in it. Or superglue in the 3 holes you carry inside lace. Or tape the life and give it some spin. I've put it on top of a mast to keep it away from the drone's body.

Es muy resistente, hecho en PLA. encaja muy bien el GPS solo para BN880 que de por si es bastante grande aunque de los mejores que hay. Para que ambas tapas encajen y no se abra en pleno vuelo pues o le pones Tubo termoretractil enorme. O superglue en los 3 agujeros que lleva dentro de encaje. O cinta de roda la vida y a darle alguna que otra vuelta. yo lo he puesto encima de un mástil para tenerlo lejos del cuerpo del dron.

It's very sturdy, made in PLA. It fits very well the GPS only for BN880 which in itself is quite big although one of the best there is. So that both caps fit and it doesn't open in mid-flight, or you put a huge thermoretractile tube in it. Or superglue in the 3 holes you carry inside lace. Or tape the life and give it some spin. I've put it on top of a mast to keep it away from the drone's body.

Encaja perfecta en el bn 880 pena que no traiga un par de agujeros para ponerle un par de tornillos seria una buena mejora para agregarle es resistente

Encaja perfecta en el bn 880 pena que no traiga un par de agujeros para ponerle un par de tornillos seria una buena mejora para agregarle es resistente

Encaja perfecta en el bn 880 pena que no traiga un par de agujeros para ponerle un par de tornillos seria una buena mejora para agregarle es resistente