cristifl There are people that did a 3d print of a jr module bay for the T-lite. So yes, using that mount and maybe the T-lite power mod, if you want to use ELRS module on full power, this is compatible. I don't agree to the ELRS lite module, because that one screws on the back of the T-lite. You will not be able to swap the modules. The Jumper T-lite is a very versatile radio.

cristifl TBS Tango 2 is 160$. Jumper T-lite Crossfire nanoTX = 133$, so this would be the cheaper solution. And it will support 1Watt of Crossfire power, if you need to fly a rocket to the moon :)))

cristifl There is high chance that it has a bearing in the top part and bronze sleeve on the bottom part. Just like the betafpv 0802 motors. For now, the only 0802 motors with double bearing might be the Xing , but those are taller and heavier than these.

cristifl On youtube people are fitting 9inch props to XL8 clones. The clones are trueX, this is squish X. The distance between front and back is 218mm which means 8.58 inch . This is the max prop size.

cristifl No, they're M8 lenses. It's not enough room for M12.

cristifl I have Runcam Split 1 and it partially fits. One problem that I have is that lens is shorter in Split 1 that in Split 2, so you have replace lens with longer one, or to cut corners from the case. Second problem I have is that holes for WIFI module and for SD card do not line up. Only USB port is lined up with the hole.

cristifl The difference between this product and the Pixracer V1 is that the V1 had problems with Spektrum receivers. They did not bind, because of the faulty signal from the Pixracer V1. In Pixracer R14 the problem was solved . What I am saying is only theoretical, I didn't bought the product yet. I hope I will buy it soon.